Self-Adhesive Film Series
High-Clarity Low-Tack Self-Adhesive Film
3-Layer Co-Extrusion · PE+POE · High Clarity · Low Haze · No Residue, More Eco-Friendly
Product Introduction
Uses 3-layer co-extrusion blown film and precision filtration technology, with minimal crystal points, no residue, and can replace coated films in some applications for better eco-friendliness. Middle layer is PE, outer layer is POE, featuring high light transmittance, low haze, high cleanliness, superior adsorption performance, and no exudation.
- ✓3-layer co-extrusion blown film technology, extremely few crystal points
- ✓No residue, can replace coated films in some applications
- ✓High light transmittance, low haze, high cleanliness
- ✓Superior adsorption performance, no exudation, more eco-friendly
Application Areas
PC/PMMA Panel
Extruded sheet process and shipping protection
PET Sheet
Various optical sheet surface protection
Phone Cover Glass
Process transfer and shipping protection
Automotive Glass
Cover glass process protection, silicone-free
Also suitable for PMMA/PC sheets requiring electroplating, without affecting plating adhesion
Typical Product Specifications
The following are High-Clarity Low-Tack Self-Adhesive Film series representative models. Select the most suitable product for your application
| Model | Substrate Layer | Adhesive Layer | Total Thickness (μm) |
Peel Strength (gf/25mm) |
Remarks | Recommended Application |
|---|---|---|---|---|---|---|
| DL25-V01AG | PE | POE | 25±4 | 0-1 | Pre-plating protection, does not affect plating adhesion | PMMA、PCElectroplating-required sheets |
| DL50-V01AG | PE | POE | 50±4 | 0-1 | Sheet transfer or post-screen-printing protection | PMMA、PC、PET、Standard glass sheets |
| DL50-V02AG | PE | POE | 50±4 | 0-1 | Good adsorption, fewer crystal points | PMMA、Glass and higher appearance requirement sheets |
| DL50-V02AZ | PE | POE | 50±4 | 0-1 | silicone-free，dyne value≥36，Heat Resistance70-80℃ | Automotive glass, phone glass cover |
| DL70-V03AG | PE | POE | 70±4 | 1-2 | Minimal adhesion build-up | PET、Reflector sheet protection |
| DL50-V05AG | PE | POE | 50±4 | 2-3 | Softer adhesive layer, better adsorption | Optical glass, PMMA sheets |
Request Product Datasheet or Technical Consultation
Contact us for High-Clarity Low-Tack Self-Adhesive Film series detailed specifications and selection guidance