Self-Adhesive Film Series
Matte Low-Tack Self-Adhesive Film
PE+POE · Matte Finish · Low-Tack No Residue · Temperature Resistant 50-200°C
Product Introduction
Utilizing three-layer co-extrusion blown film and precision filtration technology, this film delivers minimal gel particles, zero residue, and improved environmental performance. The middle layer is PE or PE+PP, and the outer layer is POE, with multiple haze levels available to meet different appearance requirements. The low-tack design is ideal for sheet turnover and shipping protection.
- ✓Three-layer co-extrusion process, minimal gel particles, no residue
- ✓Multiple haze levels available (10%/30%/50%)
- ✓PE+PP substrate withstands temperatures up to 200°C
- ✓Soft adhesive, excellent re-lamination
Application Areas
PET Sheet Protection
Optical sheet processing and shipping turnover
PC Extruded Sheet
Full-process protection for extruded sheets
PMMA Light Guide Plate
Display-grade light guide plate process protection
Substrate Glass
Post-plating protection for composite panels, withstands 200°C
Also suitable for PMMA hardened sheets, PMMA commercial sheets, and other sheet backing applications
Typical Product Specifications
The following are representative models in the Matte Low-Tack Self-Adhesive Film series. Choose the matching product based on your application scenario.
| Model | Substrate Layer | Adhesive Layer | Haze | Total Thickness (μm) |
Peel Strength (gf/25mm) |
Remarks | Recommended Application |
|---|---|---|---|---|---|---|---|
| DL25-V04AGF | PE | POE | 50% | 25±4 | 2-3 | Higher haze, withstands 50°C | Standard PMMA commercial sheets, sheet backing applications |
| DL30-V02AGE | PE+PP | POE | 30% | 30±4 | 1-2 | Withstands 200°C, dyne value ≥36 | Substrate glass protection, post-plating composite panel protection |
| DL50-V03AGH | PE+PP | POE | 10% | 50±4 | 0-1 | Withstands 70°C without wrinkling, no leaching | PMMA hardened sheets |
| DL60-V02GGE | PE+PP | POE | 30% | 60±4 | 1-2 | Soft adhesive with excellent re-lamination, can replace some cast films | Display-grade PMMA light guide plates |
| DL70-V05AGH | PE+PP | POE | 10% | 70±4 | 3-4 | Withstands 70°C without wrinkling, no leaching | PMMA light guide plates requiring higher adhesion |
Request Product Datasheet or Technical Consultation
Detailed specifications and selection guidance for the Matte Low-Tack Self-Adhesive Film series